I can remember over 20 years ago when I was in college (and working part-time in a yarn shop!) that some knitting stitch patterns were starting to written in chart form. I had always knitted cable and lace patterns with instructions that wrote out what to do row by row. I was used to doing that, but once I learned how to read charts, I found them to actually be much easier to follow. Quite a few of you have asked for charts for the stitch patterns in the Inishturk sweater pattern since they were not included. I knew I would like them, too. So, this week we have charts for the 3 larger cable patterns.
I’ve decided to include a little tutorial about how to read charts for those of you who have never tried them. So, below is a chart for Cable C:
This chart is a visual of the written instructions for Cable C. You can see that row numbers 1 and 3 are on the right of the chart and rows 2 and 4 are on the left. So, for row 1 (the RS) you will work the chart from right to left. Then, row 2 (WS) is read from left to right. (For those of you who are working this sweater in the round, you will read every row of the chart from right to left, because you are going in a circle!)
Alright, each square is a stitch and depending whether you are on the right side or wrong side of your piece, will determine how you read the symbols that go with the chart. The symbols for these charts are can be found here [PDF; must have Adobe Reader (free at adobe.com) to open].
The stitches that are empty are worked as knit stitches on the right side and as purl stitches on the wrong side. The purl stitches that are indicated by a” - “on the right side are knit on the wrong side. So, now all you need to match up is the symbols to the cables on the charts. There are a lot of different variations of 2, 3, and 4 stitch cables in this pattern, so just match them carefully to each other to see which stitches are knit, purled and whether you hold that cable needle to the front or the back.
OK, so here is the chart for Panel A (As always, you can click outlined images, like the ones below, to enlarge):
And…ta-da, the chart for Panel B (Again, click the image to enlarge):
So, for those of you who have been wanting these charts – enjoy! I always find it always helps to enlarge those charts as you are working them. For those of you who have never done a chart, give it a try and you may find you like these visual instructions!
Get more support at: